Tuesday, April 30, 2013

year of slow

A Year of Slow Cooking

A Year of Slow Cooking

/div>

Thursday, April 25, 2013

5-Ingredient Homemade Beef Stew



We have had the world's funkiest weather in the Bay Area lately. On Monday my back and shoulders got burned while gardening, and today I'm all snuggled up in a heavy sweater and fuzzy slippers.

I've been getting emails asking for "easier" recipes --- so I dug through the cabinets and freezer and made a delicious and hearty beef stew using ONLY 5 INGREDIENTS!!

I'd totally pat myself on the back, but I'm still burnt...

The Ingredients
serves 6
 
2 pounds beef stew meat
1 (16-ounce) jar southwest salsa (has corn, black beans, onions, tomatoes, chiles)
4 cups beef broth
1 (15-ounce) can garbanzo beans, drained and rinsed
1 cup baby carrots, or chopped carrot

The Directions

Use a 6-quart slow cooker. Put the meat into the bottom of your cooker and add the rest of the ingredients --- there is no need for any other seasoning; the southwest salsa provides plenty of flavor all on it's own. If you can't find this particular kind of salsa, you can certainly add frozen or canned corn or diced potatoes, or anything else you'd like. 
I was trying to keep the ingredient listing to 5, and to not pull out a cutting board, but if you'd like to doctor it up with veggies you have in the house, go for it!
Cover and cook on low for 8 to 10 hours, or until the meat is so tender it falls apart when poked.

Serve with crusty bread and a green salad. I made a loaf of homemade gluten free bread in another slow cooker. I used this recipe, but added sliced garlic cloves, diced onion, and a teaspoon of kosher salt to the batter.

The Verdict

This was a successful meal! I was pleased at how the salsa and beef broth created a fantastic soup base, and was thrilled at how easy this was. It took no time to plop everything into the pot, and because I didn't need to peel or chop vegetables I had plenty of time to whip together the bread dough before leaving the house for the day.
I used a medium salsa, and it really retained it's heat, even when mixed with the broth. If you or your family doesn't like things spicy, opt for mild salsa. You can always add a dash of Tobasco at the end if you'd like a punch of heat.

Not the stew for you? Here are a few more!
Harvest Stew
Azorean Spiced Beef Stew
Sausage and Lentil Stew
Doro Wat (Ethiopian Chicken Stew)
Turkey Stew
Bean Stew (vegetarian)
Chicken and Sweet Potato Southwestern Stew (flop! don't make this!!)
 


 


 


Monday, April 8, 2013

Slow Cooker Chicken Puttanesca





SPRING BREAK is over. It was pretty anticlimactic and I'm still trying to figure out where I went wrong. We were really looking forward to it, and had been quite excited the days and weeks leading up to this last one. The kids and I had elaborate plans of staying in our jammies all day and playing board games and gardening and writing.

Instead we watched too much tv and argued.

But! I'm now caught up on all of Mad Men and watched the entire first season of the remake of Dallas. I liked it when the boys took their shirts off.... 

anyway. 

I did cook, and I think you're going to like this one.


The Ingredients.
serves 4


4 boneless, skinless chicken thighs
1 pint cherry tomatoes, halved
3 garlic cloves, peeled and chopped
1 tablespoon dried oregano (2 tablespoons fresh, finely diced)
1/2 teaspoon dried red chile flakes
1/4 teaspoon kosher salt
1/2 teaspoon ground black pepper
1 cup pitted kalamata olives (no juice)
4 ounces fresh mozzarella cheese, sliced (to add at the very end; not pictured)

cooked pasta for serving (I used gluten free angel hair)

The Directions.

Use a 4-quart slow cooker for best results. If you only have a 6-quart, use more chicken, or don't cook it quite as long (I'd check after 4 hours on low, 3 hours on high).
Plop the chicken into the bottom of your slow cooker and add all of the other ingredients, except for the cheese.
Cover, and cook on low for 5 to 6 hours or on high for about 4 hours If you'd like, you can cook longer, but the chicken will probably fall apart and begin to shred. That's okay with me --- but if it's not with you, consider yourself forewarned!
Before serving, top with sliced fresh mozzarella cheese, and cook on high for about 15 minutes, or until the cheese has melted.
Serve over hot buttered pasta with a green salad.


The Verdict.


This is a fancy-pants chicken recipe that is super easy yet it tastes like you spent all day in the kitchen. There is very little chopping required (only from garlic; you could always use jarred if you prefer) and you can throw it all in the pot before you even put on your contacts and drain the coffee.

I had Chicken Puttanesca last summer at an Italian restaurant and knew I needed to figure out how to make it at home. I'm not, however, going to tell you what Puttanesca means because that's why they invented Google and this is a family-friendly website.

:-)

other great Italian Slow Cooker Food:

we've got giveaways up and running again on the giveaway page. Come check them out!!




 
You are using Internet Explorer 6 which is unable to render this web site properly or display the drop-down elements in the main menu. Please upgrade your browser to the latest version of Internet Explorer or try installing Google Chrome or Mozilla Firefox instead.

ikeahackker

IKEA Hackers

DON'T MISS A HACK. CONNECT WITH ME.

Featured Hacks

Tuesday, April 30, 2013

Expedit Desk


Materials: Expedit 4-compartment (2), 96"x 20" pine project panel, 8' wood mouldings (2 each of 3 different designs), L brackets (4), wood glue, finish nails

Description: I'm a work-at-home author and knitwear designer whose only office space is carved out of the hallway between our foyer and dining room. My desk has to fit against the triangle wall formed by a staircase. Making my own desk from 2 Expedits gives me 8 feet of beautiful desktop real estate, while only taking up 20" of hallway.

While I love the quality and value of Ikea furniture, most of the styles are too modern-looking for me. To make my desk look more traditional, I added moulding from my home improvement center. First I trimmed around 3 sides of the bottom of each Expedit with 1 3/4" moulding, mitering the corners. Then I added 4 1" L brackets to the upper inside edges of each piece to anchor the desktop. After that I layered 2 different mouldings and ran them all the way across the front and 2 short sides of the Expedits. I hid all the finish nail holes with putty and paint. Then I added the desktop (which I stained and varnished beforehand), securing from underneath with the L brackets.

CD storage/sofa table


Materials: BENNO DVD tower, EKBY OSTEN shelf

Description: Having built the Benno tower, saw it off at around 50cm (tall enough for 3 CDs), and use the piece which would have been the top to create a tiny 3-CDs-tall version of Benno by drilling two extra holes on each side at the top of your sawn-off tiny Benno and using the screws it comes with.

Then make another of these from the remainder of the Benno, using what was the middle shelf as the bottom (leaving the same 8cm section at the bottom as a base) and creating a top for it from a spare side piece, attaching using nails or screws.

Then, place the two small units the length of the shelf apart and nail, glue or screw the shelf on to the top. This should create a CD storage unit which can sit between the sofa and the wall, so you have a surface to place drinks/remote and also some CD storage!

~ Katie Steckles, Manchester

Monday, April 29, 2013

Borrowed Bedroom with 4 little hacks


Materials:
For wardrobe: Elga wardrobe, wallpaper, matte Mod Podge
For Billy bedside storage: Billy bookcase, Olsbo doors, wallpaper, Liksidig, Jansjo
For Ribba clothes hanger: Ribba picture ledge, Grundtal bar, Grundtal hooks
For lampshade: Fansta lampshade, wallpaper, PVA glue

Description: There are really four little projects in my Borrowed Bedroom, none of them particularly difficult and all spotted elsewhere (hence the 'borrowed' in the title!).

First, and probably most dramatic, is the Elga makeover. Our master bedroom is really quite small and we needed as much storage space for our clothes as we could squeeze in - the Elga was the best fit. However we couldn't agree on colour and finish - I wanted as much light as possible in the room so was inclined towards a white carcass and 3 mirror doors. Husband on the other hand had no interest in seeing himself endlessly reflected and neither of us liked the Aneboda doors. So in the end the Engan doors with black carcass and one mirror door was our only possible compromise. As I'd suspected, it overshadowed our little room but as we were shortly to have no. 2 baby I didn't feel up to doing anything about it for a while. Then while browsing Ikeahackers one day I came across this post and was inspired!

Narrow Bathroom Units


Materials: LILLA…NGEN Bathroom Units

Description: We have a narrow bathroom, but needed to put some base units in to cover existing pipework and provide some storage. Ikea have the narrow LILLANGEN washbasin cabinets but no other narrow base cabinets - so we used the upper wall cabinets as base cabinets. Batons attached to the wall brought them out to the same level as the sink unit. For the worksurface we used Pragel worktops cut to size.


~ Ian Grange, United Kingdom

Coffee table from old Nenne computer desk


Materials: 4 dowels, 2 x 6cm screws, 2 pieces of wood 44cm x 5cm x 2cm, 6 pieces of wood 72cm x 3,5cm x 1cm; 1 pieces of wood 44cm x 3,5cm x 1cm; old champagne box(optional)

Description: I decided to turn my old computer table in to a coffee table. Rather than buy one, I liked the curves of this discontinued Nenne. Initially my plan was to use copper pipes, but since I had plenty of leftover wood from other DIY projects, it was better to use it in this. Here are the steps:
1 - remove the castors, net and keyboard tray
2 - the bottom panel which had the castor, needs to the turned 180 degrees, so that the castor holes are facing inside.
3 - mark the inside of the panels where the supporting pieces of wood will be (I marked them at 6,5cm from the edge)

Tractor bed


Materials: Mydal bunk bed

Description: My almost 4 year old is crazy about tractors...New Holland ones, to be precise. The only thing he wished for for his upcoming birthday was a blue tractor bed. I researched some tractor beds online and found a John Deere tractor bunk bed which I revamped a bit and turned into this tractor bed, complete with scoop, cab, and play space underneath. We plan on fitting a platform on the bottom slats for a secret hide-out for him.

iPoise


Materials: TERTIAL lamp, 4world iPad bracket

Description: Taking the TERTIAL lamp (£8.50) from Ikea remove the lamp fitting and flatten bracket

Then take 4world iPad holder, position the bracket in the centre of the rotating disc, drill a couple of holes get a couple of small bolts nuts and washers.


Fit the bracket and there you have it a multi-positional iPad bedside holder for less than 20 quid!

~ Simon Knowles, Liverpool, UK

Saturday, April 27, 2013

Hacker help: Coffee to Dining convertible table?


Materials: unknown

Description: I'm looking to build a coffee/dining convertible table. Convertible furniture is becoming more appealing with smaller condos, but the prices are ridiculous. I think we can do better.


What I'm looking to accomplish is a table like this one (pics above).

Any initial thoughts are welcome!

~ marek, Toronto, Canada

Photos: Modernika.net


Marek,
Please check out an earlier post and discussion on something similar. Hope it will kickstart some thinking. Here's the link. ~ Jules

Unnu inspired media bench


Materials: Besta

Description: Just bought my first apartment and have begun the process of furnishing it. When it came to the TV area I wanted this one. It wasn't only the look of it that caught my attention. The doors are covered in speaker fabric, and this way I would be able to hide my old, ugly stereo system in it. It would let IR signals in and sound out. Only problem was that it costs about $1000 here in Norway.

So I turned to Ikea. Here's a list of the items i needed to create my own version:

- BESTÃ… Shelf unit (120cm)
- BESTÃ… Shelf unit (60cm)
- 3x BESTÃ… VARA door

I also picked up speaker fabric and a stapler from the local hardware store for about $25.

Molger 2.0


Materials: For this hack you need 2 Molger shelves and 1 (or 2, I used 1) Molger benches. Saws, drill, screws, nails and "brackets".

Description: After moving we had too many Molger units, and to save space I decided to build a shelf that fit around my washer.

It would be sweet if the Molger bench and shelf could play together like Legos, but they don't. So you'll need a lot of screws and plugs. Good tools are a must (or at least makes thing a lot easier).

Kroby into Skurar pendant double lamp


Materials: 1 x Kroby pendant double lamp, 2x Skurar plant pot

Description: This hack is made by my friend from Hamina, Finland. She turned her old Kroby pendant lamp into totally new look by changing the glass lamp shades into Skurar plant pots. It took only a driller to make a few holes to put those Skurar plant pots into the lamp and voila, great new lamp! She gave her permission to put this hack idea. Thank you Taru!

~ Mona, Helsinki, Finland

New LOOK for LOCK


Materials: LOCK ceiling lamp, napkins, PVA glue, brush

Description: To add an creative touch to a simple LOCK lamp you can use simple napkins with the design you like.

1. Release the LOCK glass from the mount
2. Detach the top layer of the napkin (the lower layers without print are not needed)
3. Apply glue sparingly to the glass and use the brush to gently press the napkin motive to the glass
4. Use more glue to seal the napkin to the glass. To avoid cracks and creases, always work from the inside out.

~ Svenja, Germany

Friday, April 26, 2013

Spiral Staircase with Numerar


Materials: NUMERÄR Countertop Oak

Description: After searching for spiral staircases and not finding anything that would work for my situation I decided to try and create my own. I stumbled upon the countertop at Ikea and Knew they would look great as the treads and they are decently cheap as well. I have about $200 in steel and $160 for the countertop in the staircase that would have cost upwards of $1k

I went with a 4" steel pipe from the local steel yard buying 18'. Also purchased some angle and flat steel to frame out the stairs. My treads needed to be 22" long making the whole staircase 4' including the center pipe. The treads are 30 degrees, so you can fit 6 on one side or 180 degrees together. I had a total of 7 treads or runs and about a 9" rise. Take the overall height and divide by the runs = the rise needed. Once all this was welded back supports aren't needed and the stairs are very rigid.

Malm Dresser Turned Dog Window Seat


Materials: Malm Dresser, Paint, Plywood, Foam, Batting, Fabric, Staples, Upholstery Nails

Description: I created a window seat for our dogs so that they are able to sit and look out the window.

Instructions:

Paint dresser (optional).
Cut a piece of plywood to fit the top of the dresser.
Cut a piece of foam the same size as the plywood.
Wrap batting and fabric around to backside of plywood and staple down.
To create tufts, I used upholstery nails hammered down through the fabric, batting and foam into the plywood. (optional)


See more of the window seats for dogs.

~ Lauren, Ohio

Billy library to entertainment center


Materials: Billy bookcases, Besta TV stand, Framsta panels

Description: We converted our guest bedroom into a TV viewing area and needed a wall unit that would hold a 42 inch TV as well as a boatload of books. Because the unit was being placed on the wall where the door opens, we only had about 8.5 feet of clearance. Most entertainment systems were either too long to clear the door or too short and would not fit all our books. Even at IKEA the majority of options were 15 or 30 inch wide bookshelves and 47 inch TV stand.

We decided to use our existing Billy bookcases and hack it to what we needed. We were staring with 2 24 inch bookcases (no longer available), 1 30 inch bookcase and 1 end unit (also no longer available). We gave away the 30 inch bookcase and used the rest for our hack. The length was exactly what we needed when combined with the Besta TV stand, but we ran into an issue with color. Since our Billy bookcases were years old, they were in a color no longer offered. We decided beech would be close enough considering most of it would be covered.